Welcome to our website
T&S Timur welcomes consists of a young and energetic team, to give our best service in Online Leak Sealing Services & Heat Treatment Services. We are fully ready to take any challenge with competitive solution in Online Leak Sealing Services & Heat Treatment Services. With sufficient equipment and skilled manpower, we promise our best services in every task assigned. With 11 years experiences, we will make you proud with every single job we take. We able to serve you in Malaysia and worldwide including onshore and offshore. What we do: · Online Leak Sealing Services (Box Clamp/Enclosure, Valve Gland Packing, Valve Bonnet, Brass Wire etc) · Heat Treatment Services (Pre-Heat, PWHT, Normalizing, Gas Firing, Furnace Facility etc) · Wrapping · Hardness Testing · NDT (DPT, MPI, RT, UT, PMI etc) · Fabrication (Lathe Machine, Milling Machine etc)
T&S TIMUR SDN BHD
INTRODUCTION
We take a great pleasure in producing our construction Pre- qualification statement, hoping we will assist you in comprehending our organization and
the various spectrum of it activities. We also hope that this documentation will enlighten you to know and hope that we will be part of service to you.
T & S Timur Sdn Bhd was established on 15th August 2001 as a Heat Treatment (Pre and Post weld) and On-Line Leak Sealing company. The company is
also engaged on the business as suppliers and contractors providing engineering services including Heat Treatment, On-Line Leak Sealing, Hardness
Testing and NDT. We also have the fabrication division where we fabricated box enclosure / clamp for leak sealing services by our self at workshop.
Even, T & S Timur Sdn Bhd is a new established company, we assure you that we are fully prepared for the task that will be assigned to us as we had a
group of staffs that are very qualified in performing the work. All members of our company will do full effort emphasizing on better quality and time
schedule as target with the fine teamwork.
PROVIDE YOU 24 HOURS SERVICES IN ON-LINE LEAK SEALING SERVICES AND
HEAT TREATMENT SERVICES
1
2
3
T&S TIMUR SDN BHD
PROVIDE YOU 24 HOURS SERVICES IN ON-LINE LEAK SEALING SERVICES AND
HEAT TREATMENT SERVICES
Quality of Policy Statement T&S Timur Sdn Bhd
To achieve the set goals, T & S Timur Sdn Bhd has officially opened a system that uses the MS ISO
9001: 2008 SPK requirements as a guide. This system will ensure that customer requirements are
identified and appropriate measures are established in our system to meet these requirements.
The main objectives of T & S East Sdn Bhd are:
•
Providing our customers with services that meet their needs and exceed expectations them.
•
Improve the quality of our services to meet our customers' needs on an ongoing basis.
•
Develop an efficient and productive workforce to achieve operational excellence,
which fully complies with all rules regulations and legal requirements of
the relevant companies and governments.
•
Provide our services within the specified timeframe as required by the customer.
•
To give a good return on investment to shareholders of the company.
This achievement provides a stimulus for the continuous improvement of our activities.
This policy continues to be developed at T & S East Sdn Bhd, which outlines the nature and
structure of our business in terms of core business and support processes.
The Quality Manual sets out guidelines on how this policy is implemented and to provide
guidance and instruction on quality management disciplines among all the relevant parts
of the company.
T & S East Sdn Bhd's management is committed to the implementation and maintenance of Quality
Management Systems as outlined in this Quality Manual.
All employees have agreed to comply with this system. Compliance with policies and procedures
involving every aspect of Quality Management System, control and detailed
instructions will enable this goal to be achieved.
Responsibility for quality management, procedures and instructions outlined in this manual lies with
the Quality Management Representative.
Achieving quality standards is the responsibility of all employees of the company, from the
General Manager down, to realize the objectives set by T&S Timur Sdn Bhd.
Zulkalnain bin Ramly@Mokhtar
General Manager
10 Disember 2011
OUR POLICY
COMPANY STRUCTURE
On-line leak sealing services is the process of stopping the undesirable escape of liquid or gas from plant equipment, flanges, valve, coupling and piping whilst the plant remains on-line. This enables production to
continue uninterrupted.
T & S TIMUR SDN BHD provides on-site specialized mechanical services to power generators, petrochemical, refining, utility providers and 24 hour continuous process industries. These qualities assured services are
available 24 hours a day, 365 days a year, and are delivered by our multi-skilled technicians, qualified in specialist services including on-line, under-pressure leak sealing and hot tap connections. We can offer quick
response solutions to all our customers including in-house manufacture of essential equipment.
It allows processes to continue and save the cost of a system shutdown. Pressures from vacuum to 300 bars, at temperatures from -100°C to 650°C, can be sealed safely with proven methods and procedures. Steam,
air, water, hydrocarbons and most chemicals can be sealed using our vast range of sealants. Purpose designed and built clamps and enclosures can be provided to suit most circumstances.
CUSTOMER BENEFITS
1.
Enables plant operators to repair leaks on-line without expensive shutdowns.
2.
Conserves energy and resources - no off-spec product produced during plant start-up.
3.
Reduces the amount of pollutants emitted - environmental friendly.
4.
Promptly eliminates health and safety concerns.
THE COMPONENTS TO BE SEALED:
1.
Steam (saturated & superheated).
2.
Air.
3.
Water.
4.
Boiler feedwater.
5.
Hydrocarbons.
6.
Chemicals.
7.
Gases from cryogenic.
On-line Leak Sealing Services
Fully fabricate clamp/enclosure at fabrication yard t&s timur sdn bhd. Fabrication team with skilled manpower and full capacity of machineries able to work 24 hrs per day, 7 days per week and 365 days per year.
Capacity of machineries;
Lathe machine
Milling machine
Drilling machine
Cutting machine
Welding machine
Fabrication Services
T & S Timur Sdn Bhd has established wrapping work. We offer a range of proven maintenance and repair products that are unique in pipeline service. These products eliminate or minimize the cost of plants and
equipment downtime.
Our range maintenance and repair products are used for leak repair, corrosion protection and reinforcement, parts repair and rebuilding, corrosion and were coating, pipe line rehabilation, etc. each of the products
are engineered to be apply on many application.
Our products are in used in the following industry :
•Oil and gas •Offshore •Petrochemical
•Chemical •Marine •Power generation
•Pulp and paper •Mining and metals •Semiconductors and electronics
•Manufacturing and processing •Water and waste water •Building and facilities maintenance
CUSTOMER BENEFITS
1.
Enables plant operators to repair leaks on-line without expensive shutdowns.
2.
Conserves energy and resources – no off-spec product produced during plant start-up.
3.
Reduces the amount of pollutants emitted – environmental friendly.
4.
Promptly eliminates health and safety concerns.
THE COMPONENTS TO BE SEALED:
Steam (saturated & superheated), Air, Water, Boiler feedwater, Hydrocarbons, Chemicals, Gases from cryogenic, etc.
Wrapping
This company is also engaged on the business as suppliers and contractors providing engineering services including Non-Destructive Testing (NDT).
TYPE OF NDT
• Radiography Testing
• Ultrasonic Testing
• Magnetic Particle Testing
• Dye Penetrant Testing
• Positive Material Identification
• Hardness Test
• Vacuum Box Test
• Videoscope Inspection
ADVANCED NDT SERVICES
• Eddy Current Testing
• Magnetic Flux Testing
• Internal Rotary Inspection System
Non-Destructive Testing (NDT)
T&S TIMUR SDN BHD
PROVIDE YOU 24 HOURS SERVICES IN ON-LINE LEAK SEALING SERVICES AND
HEAT TREATMENT SERVICES
Heat Treament Services
1. Post Weld Heat Treatment
Any type of heat treatment carried out immediately or shortly after welding.
2. Preheating
This is usually a medium temperature heating process applied to metals before some other thermal or mechanical treatment is applied, usually before or during welding
3. Normalizing
This is a heat treatment process, which is carried out to improve the grain structure of a material following welding or cold working. When carried out after welding the course grain structure is improved by
grain growth giving reduced brittle hardness and improving tensile strength and impact value.
4. Quench Hardening
Heating a metal up to a high temperature and then rapidly cooling in still air, water or suitable oil, which results in making the metal hard.
5. Tempering
This is a heat treatment, which follows a quenching hardening heat treatment. Tempering will increase the toughness of the hardened metal.
Address: Main Office
T&S TIMUR SDN BHD
PT 12515 PLOT B2, KAW. PERUSAHAAN CACAR,
MUKIM KUALA PAKA, 23100 PAKA, DUNGUN,
TERENGGANU DARUL IMAN,MALAYSIA
Address: Branch
T&S TIMUR (KLANG) SDN BHD
LOT 1032, BATU 3, KAMPUNG SUNGAI KANDIS,
41000 KLANG, SELANGOR. MALAYSIA
TEL/FAX NO: +603-3371 4188
Phones: Fax:
+609-827 7240 +609-827 7241
Email:
admin@tstimur.com
tstimur@yahoo.com
Company Location
T&S TIMUR SDN BHD
PROVIDE YOU 24 HOURS SERVICES IN ON-LINE LEAK SEALING SERVICES AND
HEAT TREATMENT SERVICES
